Back to overview
V2.4

Wansview 1080p Camera Mount

Rhastlyn

A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion
    Images
      CameraMountingHardware_Arrows.png
      HardwareInstalled.jpg
      InstalledBackFinal.jpg
      InstalledSideBack.jpg
      WansviewWebcam.PNG
    STL
      WansviewCameraMount.stl
    .metadata.yml
    README.md

Select a file to view it.

Wansview 1080p Webcam Mount

Image

This is a mount designed for a resonably priced webcam that's an alternative to the common Logitech choices. The mount is designed to interface with the Voron 2.4 spec extrusions and uses common mounting hardware (2x m3x8 SHCS or BHCS, 2x m3 spring nuts).

Image

Installation:

  1. Remove the black sticky covers indicated by the two arrows
  2. Remove the mounting hardware with a phillips head screwdriver

Image

  1. Install the new mount reusing the OEM hardware; position as indicated so your image is oriented correctly (note: get the screw snug enough to hold the camera in place by friction yet still allow you to make small adjustments after install).

Image

  1. install centered on top extrusion with your choice of m3 spring nuts and m3x8 screws.
  2. Enjoy seeing your printer printing

Image

Other mods by Rhastlyn
© 2024Voron Design.All rights reserved.