Mini Afterburner ADXL345 Mount

A mount to attach an ADXL345 sensor to the Mini-Afterburner toolhead.

BOM

• 2x M3x40 BHCS
• 2x M3 screws (at least 4mm, preferably nylon)
• 2x M3 heat-set insert. (3x5x4)

Instructions

• Install the M3 heat-set inserts into the 2 larger holes on the part.
• Remove the lowest 2 M3x35 screws from the front of the MiniAfterburner
• Attach the mount using 2 M3x40 screws in the same holes.
• attach the ADXL345 to the top of the mount, using m3 screws, ensure axes are oriented correctly.

Images