V0

V0 1515 T-nut

by Zen3D
V0 1515 T-nut
M3 square and hex nuts for Voron0 1515 frame
2021-03-24T00:49:40
725
GPL v3.0
IMG1.jpg
IMG2.jpg
IMG3.jpg
LDO
HexNut_1515.stl
SquareNut_1515.stl
MakerBeam
HexNut_1515.stl
SquareNut_1515.stl
README.md

Voron0 1515 T-Nut

It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of MidPanel, TopHat, BedMount.

hardware:

  • M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm) (Recommended!)

or

  • M3 hex nuts. The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works.

The MakerBeam version is lower than the LDO version.

print settings:

  • layer height: 0.2mm

IMG1 IMG2 IMG3

© 2023Voron Design.All rights reserved.