Back to overview
V2.4
VT

V2.4 Door Hinge M3 3mm 180deg

quattroerik

Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft
    .metadata.yml
    Assembly.png
    Front_Door_Mod.f3d
    README.md
    door_hinge_new.png
    hinge_left_x2.stl
    hinge_mount_x4.stl
    hinge_right_x2.stl
    latch_x2.stl

Select a file to view it.

Door hinges mod for v2

  • use m3 screw and heat insert as shaft (inspired by mosher)
  • adjusted to 3mm panel thickness
  • Doors can be opened approx. 190 degrees

What you need additionaly to the original door hinges: 4x Standard Voron Heat insert 4x M3x35mm screw SHCS

Image of Hinges

Assembly instructions: Insert the heat insert from below as seen in the picture. Assembly to the Frame on the sides of the printer with the standard M3x8mm and Hammerhead nut.

Image of Hinges

© 2024Voron Design.All rights reserved.