V2.4

Exhaust Housing for 120mm Fan and 4in Duct

by hergtoler
Exhaust Housing for 120mm Fan and 4in Duct
v2.4 Exhaust Housing for 120mm Fan and 4in Duct
2021-10-04T01:01:52
499
GPL v3.0
README.md
STL
adapter_120mm_to_duct.stl
bowden_adapter_panel_mount.stl
exhaust_120mm_fan_mount.stl
exhaust_housing.stl
images
exhaust_120mm_assembly.png
exhaust_120mm_installed.jpg
fan_mount_inserts.png
housing_inserts.png
step1.png
step2.png
step3.png
step4.png
step5.png
step6.png

Voron v2.4 Exhaust 120mm with 4in Duct Adapter

This mod allows use of a 120mm fan and includes an adapter to connect a 4in duct. It does not include space for filters. The bowden adapter has been moved to side entry.

Parts Required

PartQuantityComment
M3 Threaded Insert12
M3x10 SHCS2
M3x6 SHCS2
M3x8 SHCS4
M3x30 SHCS4
120mm x 120mm x 25mm fan1

Printing

  • Print using standard Voron part settings and in the orientation used in the STL
  • Supports should not be needed. There are bridging areas, but integral supports are included in the design.

Pre-Install

  • Install M3 threaded inserts into the printed pieces.

Installation

  1. The standard exhaust grill and mounts will be used, and they should be installed before the new housing.
© 2023Voron Design.All rights reserved.