Back to overview
V2.4

BTT PITFT50 v2 Mount

alanho

A mount for the BTT PITFT50 v2 Touch Display
    CAD
      BTT_PITFT50_Mount_v6.f3z
    STLs
      BTT-PITFT50-v2-Mount.stl
    images
      IMG_6447.jpg
      IMG_6451.jpg
      f360.jpg
    .metadata.yml
    README.md

Select a file to view it.

Note this mod is only compatible with the v2.0 version of the PITFT50**

See the following two models for v2.1 compatibility

Refer to this discussion to determine which one suits your needs best.

BTT PITFT50 v2 Mount

This work is based on sttts's Waveshare 5.5inch mount. BTT PITFT50 v2 has a different layout than v1, featuing a brightless thumbwheel, an orientation switch and a JST XH port for unknown function. This design provide accessibility to the thumbwheel and switch.

Test Test Test

BOM

  • 4x M3 Heatset Inserts
  • 4x M3x6mm to attach to the mount
  • 3x M3x10-12mm to attach the mount to the frame
  • 4x M2.5x4mm (included in the BTT PITFT50 v2)
  • 500mm ~ 600mm Ribbon Flat Cable for Raspberry Pi Camera (depends on the position of the Raspberry Pi. The included one is too short)

Instructions

Please use the mount in sttts's mods to amount this to the frame. No re-print of skirts is required!

Print Settings

Standard Voron recommended print settings

© 2024Voron Design.All rights reserved.