V0

Kirigami LED Bed Front

Kirigami bed front with space for a single LED or Neopixel button

.metadata.yml

Beddefuser2.jpg

Bedfront.jpg

Kirigami_Bed_LED_Diffuser_.stl

Kirigami_Bed_LED_Front.stl

README.md

Select a file to view it.

V0 Kirigami bed front with space for LED

This is a modifaction of the V0 Kirigami front bed made by Kosh42EFG

Bedfront

Kirigami bed: https://github.com/christophmuellerorg/voron_0_kirigami_bed
1x Kirigami_LED_Bed_Front.stl printed in ABS using standard Voron settings
1x Kirigami_LED_Bed_Front_defuser.stl printed in any white material
2x M3x8 CHCS
2x M3 nuts
1x LED. I use a single neopixel mini button
4x wires for the neopixel (you can use three if this is the only one in the chain)

Install the kirigami bed
Wire the neopixel and place in the slot with the wires coming out through the tunnel
Add the defuser in front of the neopixel, make sure it is a tight fit to hold it well (print thicker if needed)

Beddefuser2

Fit the Kirigami_LED_Bed_Front.stl to the front of the kirigami bed using the M3 screws and nuts
Add configuration change to the printer.cfg in klipper:
- [neopixel my_leds]
- pin: PA8
- chain_count: 1
- color_order: GRB
- initial_RED: 1.0
- initial_GREEN: 0.0
- initial_BLUE: 0.0