CAD
Wago_221-41x_Extrusion_&_Thin_Din_Mount.f3d
Wago_221-41x_Extrusion_&_Thin_Din_Mount.step
Wago_3x_221-41x_Angled_Din_Rail_Mount.f3d
Wago_3x_221-41x_Angled_Din_Rail_Mount.step
README.md
STLs
Din_Mount_Bracket.stl
Wago-3x-221-413_Thin-Din_Rail_Mount.stl
Wago_2x_221-415_Extrusion_Mount.stl
Wago_2x_221-415_Thin_Din_Rail_Mount.stl
Wago_3x_221-412_DIN_Mount.stl
Wago_3x_221-413_DIN_Mount.stl
Wago_3x_221-413_Extrusion_Mount.stl
Wago_3x_221-415_DIN_Mount.stl
Wago_3x_221-415_Extrusion_Mount.stl
Wago_3x_221-415_Skirt_Inlet_Mount.stl
Wago_3x_221-415_Thin_Din_Rail_Mount.stl
Wago_4x_221-412_Extrusion_Mount.stl
Wago_5x_221-412_Extrusion_Mount.stl
WagoMounts-Extrusion&Din.png
WagoMounts.png
This is a simple mount for attaching wago 221-41x to extrusion: by power inlet and under bed, or to Din Rails, for smaller builds.
BOM - 2x M5-10mm bolts & 2x M5 T-nuts, Wago 221-41x
This is a simple angled mount for wago 221-41x blocks in sets of 3 that mount to a din rail using the Trident power supply din rail clip. Original design by Socal3D on voron discord, I just cleaned up the design and added the mount.
BOM - 2x M3-8mm bolts, Wago 221-41x
Made byexceptionptr#0544