This is a revised Stock toolhead for the Revo Voron, Dragon or Rapido hotend. It takes the technology from AB-BN and ports it for use with the stock (v2.4) Afterburner Assembly.
This allows you to use the stock Afterburner 4020 based part cooler and reduces the potential for jamming.
The only real use case I know of for this is for someone who does not have a 5015 fan.
The stock Afterburner was designed for a full size E3D V6 hotend. These newer hotends use a much smaller heatsink. The result of this is that the bulk of the airflow bypasses the heatsink, which can result in jamming
In addition, the stock toolhead blows a lot of air onto the bed. This design reduces overall airflow, while increasing hotend cooling.
Finally, the stock ducts tend to melt and warp over time.
AB-BN was developed over the course of 2020 and 2021 to solve several issues with the stock afterburner airflow. Dozens of prototypes were modeled, simulated, printed, and tested. In the end I found that cooling was improved if we:
This reduces the overall airflow and increases the airflow that matters to the toolhead.
I also included the bleed air channels that help reduce part duct melting.
This solution is aimed at someone who wants to keep using most of the stock Afterburner and needs a little less hotend jamming.
I recommend you use the full AB-BN (or Stealthburner) if you can.
I have support for E3D's Revo Voron and Phaetus' Dragon and Rapido toolheads.
For Revo Voron, you need both front and back pieces. The toolhead mounts with M3x8 (0.5mm pitch) screws.
For Dragon, you do not need a new back piece, the stock dragon back is fine. Mounts with M2.5 screws.
For Rapido you will need both front and back pieces. Mounts with M2.5 screws.
