Designed to hide cables that are running around the top corners of 2.4 extrusions behind the z idlers.
They are large enough to fit 3 pin microfit connectors.
There maybe some small loss in z. Don't forget to check your clearances after installing.
Pro tip: It may take some fiddling to get the wires to fit. You will know they are in place when it sits flush to the extrusions without wobbling. Also disable 'Thin Walls/Detect Thin walls' so the mounting ears print cleanly.
| Size | Qty |
|---|---|
| M3x8 | 8 |
| M3 T-Nut | 8 |
