V1.8
V2.4
VT

Bowden Tube Guide

Galvanic

Bowden tube guide and CANBUS wire support
    CAD
      Bowden_Guide.f3z
      Bowden_Guide.step
    IMAGES
      Dokuu.jpg
      Short.jpg
      Tube1.jpg
      Tube_Guide.png
      chirpy.jpg
      chirpy2.jpg
    STL
      Long_Arm.stl
      Mount.stl
      Short_Arm.stl
    .metadata.yml
    Readme.md

Select a file to view it.

PTFE Bowden Tube Guide and Canbus Wire Support

Required Hardware:

  • M3x8 Bolt and M3 T-nut
  • M5x10 Bolt or a M5x8
  • Optional 4mm drill bit for cleaning out bowden tube path

About

In my 350 build the PTFE tube kept getting caught so I made this arm to keep it up. The shorter arm works better so I recommend using it instead

Install

  • Drill out bowden guide with 4mm drill bit for a perfect fit (optional)
  • Bolt mount to rear frame with M3x8 and tnut putting the lip at the top
  • Screw arm on with M5x10 (I used a M5x8mm and it works fine) into the plastic allowing the arm to still be able to swivel

© 2024Voron Design.All rights reserved.