LGX Lite Toolhead Setup For Voron V0.1
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/mini-after-lgx-lite_header-1200x628.jpg)
AN ALTERNATIVE TO THE VORON ORIGINAL SETUP
The Mini After-LGX-Lite
Designed by Olof Ogland, based on a draft design by Nemgrea.
This project also includes:
- Mounts for several hotends;
- AdaFruit and Generic ADXL345 accelerometer mounts – for Klipper’s input shaping tuning;
- Z-axis Bed Adjustable Y offset set – to allow the print bed to move back and forth from -1 up to +3.5 mm.
- Klicky – a z-probe mount that attaches with magnets
License and Credits
License:
https://github.com/VoronDesign/Voron-0/blob/Voron0.1/LICENSE
Original source:
https://github.com/VoronDesign/Voron-0
Credits:
Nemgrea, DaveR, JosAr
Source for Klicky integration:
https://github.com/jlas1/Klicky-Probe
Mini After-LGX-lite
Most screws required to perform the installation should be already on your kit. You may need some additional sizes and types. The following list identifies them:
- 2x M3x6 BHCS for belts
- 2x M3x30 BHCS for LGX Lite
- 4x M2.5×6 low profile for Copperhead
- 2x M3x10 BHCS LGX Lite to cowling
Cowling Universal
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Cowling-Universal.png)
Hotend Mount MOSQUITO 3007 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-MOSQUITO-3007-Fan.png)
Hotend Mount MOSQUITO 3010 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-Mosquito-3010-Fan.png)
Hotend Mount COPPERHEAD Screw Mount 3007 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-Copperhead-Screw-Mount-3007-Fan.png)
Hotend Mount COPPERHEAD Screw Mount 3010 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-Copperhead-Screw-Mount-3010-Fan.png)
Hotend Mount DRAGON 3007 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-DRAGON-3007-Fan.png)
Hotend Mount DRAGONFLY 3007 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-DRAGONFLY-3007-Fan.png)
Hotend Mount DRAGONFLY 3010 Fan
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/Hotend-Mount-DRAGONFLY-3010-Fan.png)
X-Carriage
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/X-Carriage.png)
Tools
PTFE Cutting Jig
![](https://raw.githubusercontent.com/VoronDesign/VoronUsers/main/printer_mods/Bondtech/Mini-After-LGX-Lite/./Images/PTFE-Cutting-Jig.jpg)