V0

V0 Clippable LED Caselight

joposter

LED Case light for the V0 that clips into the extrusions
    CAD
      led_mount_clippable.step
    STL
      led_mount_clippable.stl
      led_mount_clippable_mirrored.stl
    images
      cob_led.jpg
      printer_installed.jpg
      slicer_brim.jpg
    .metadata.yml
    README.md

Select a file to view it.

V0 clippable Caselight LED Mounts

This LED strip mount is sutable for led strips with a width of 8 - 12 mm, but was made for these 24V COB Led strips.

Since they come in segments of 62.5 mm, the strip mounts are 125mm long to fit two of those segments. When using different leds, the slicer scaling function can be used to shorten them. The clips should still work.

Attach the LEDs

The mentioned led strips come with an M3 adhesive pre-applied, which should be the case for most LED strips commonly found online. This adhesive should be sufficient for attaching LEDs to this mount.

How to print them

The clips were made to print upright, but will probably require a brim for bed adhesion.

print orientation

© 2024Voron Design.All rights reserved.