V2.4

Hidden cable routing z belt cover

Akio

Z belt covers that allow hidden cable routing.
    cad
      cable_routing_z_belt_cover_a_mod_rail_notch_v2.2.step
      cable_routing_z_belt_cover_a_mod_rail_notch_v2.4.step
      cable_routing_z_belt_cover_a_mod_v2.2.step
      cable_routing_z_belt_cover_a_mod_v2.4.step
      cable_routing_z_belt_cover_b_mod_rail_notch_v2.2.step
      cable_routing_z_belt_cover_b_mod_rail_notch_v2.4.step
      cable_routing_z_belt_cover_b_mod_v2.2.step
      cable_routing_z_belt_cover_b_mod_v2.4.step
    img
      cable_routing_z_belt_cover_mod.png
      cable_routing_z_belt_cover_mod_cable_routing.png
      cable_routing_z_belt_cover_mod_cross_section_view.png
      cable_routing_z_belt_cover_mod_cross_section_view_rail_notch.png
      cable_routing_z_belt_cover_mod_rail_notch_v2.4_img_2.png
      cable_routing_z_belt_cover_mod_v2.2_img_0.png
      cable_routing_z_belt_cover_mod_v2.2_img_1.png
      cable_routing_z_belt_cover_mod_v2.2_img_2.jpg
      cable_routing_z_belt_cover_mod_v2.2_img_3.jpg
      cable_routing_z_belt_cover_mod_v2.4_img_0.png
      cable_routing_z_belt_cover_mod_v2.4_img_1.png
    stl
      cable_routing_z_belt_cover_a_mod_rail_notch_v2.2.stl
      cable_routing_z_belt_cover_a_mod_rail_notch_v2.4.stl
      cable_routing_z_belt_cover_a_mod_v2.2.stl
      cable_routing_z_belt_cover_a_mod_v2.4.stl
      cable_routing_z_belt_cover_b_mod_rail_notch_v2.2.stl
      cable_routing_z_belt_cover_b_mod_rail_notch_v2.4.stl
      cable_routing_z_belt_cover_b_mod_v2.2.stl
      cable_routing_z_belt_cover_b_mod_v2.4.stl
    README.md

Select a file to view it.

Hidden cable routing z belt cover mod

Credit

Mod based on the design of the Voron crew. Thank you for your awesome work!  

A big thank you goes to Mbravorus as well, for contributing the rail notch version.

Print settings

As stated in the Voron documentation:

  • ABS
  • 0.2mm layer hight
  • 0.4mm extrusion width
  • 40% infill
  • wall count 4
  • top/bottom layers 5
  • no supports

Bom

Only the printed file.

Improvement

Added the possibility to route cables on the bottom of the cover.

Description

I liked the design of the old Voron 2.2 covers more than the current design so I based my mod on them. But due to several requests I also included the current 2.4 covers.

To be able to achieve a clutter-free look i hid cables in the extrusions as much as possible. So i also wanted to have a hidden way to route the cables to the bottom compartment. To achieve that i made the z belt cover a bit thicker and cut a path on the bottom where cables can be routed without being seen.

The files are named with v2.2 in the filename for the 2.2 version and v2.4 in the filename for the 2.4 version.

Things to consider during installation

The modified z belt covers are thicker than the originals. You may have to move up your z-rails, if you installed them flush to the top of the original covers. If you don't want to do this you can use the rail notch version, which has a cut-out for the rails.

Make sure to constrain the cable you are routing through to the bottom, so it does not interfere with the z-belts. Use a zip tie or tape to hold the cable securely in position / away from your z-belts.

Pictures

z belt cover old new  

 

z belt cover  

 

z belt cover 2.2 top 2.2 version - top  

 

z belt cover 2.2 bottom 2.2 version - bottom with path for routing cables  

 

z belt cover 2.4 top 2.4 version - top  

 

z belt cover 2.4 bottom 2.4 version - bottom with path for routing cables

z belt cover 2.4 rail notch 2.4 version - top with rail notch

z belt cover 2.4 rail notch 2.4 version - cross section view of the rail notch version

Wire routing

z belt cover The cable needs to be wired like this below the cover  

 

z belt cover Cross section view

z belt cover  

© 2024Voron Design.All rights reserved.