Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini

EmJay276

This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend

License:

General Public License v3.0

CAD

Stealthburner_Printhead_Dragon_UHF.stp

Stealthburner_Printhead_Dragon_UHF_mini.stp

STL

UHF

SB_Dragon_UHF_TH_Front.stl

SB_Dragon_UHF_TH_Rear.stl

[a]_Stealthburner_Body_Dragon_UHF.stl

UHF_mini

SB_Dragon_UHF_mini_TH_Front.stl

SB_Dragon_UHF_mini_TH_Rear.stl

images

back.png

back_uhf.png

back_uhf_mini.png

cable_channel.png

cross_section.png

front.jpg

front_uhf.png

front_uhf_mini.png

hotend_installation.jpg

.metadata.yml

README.md

Select a file to view it.

Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini tool cartridge

With special thanks to @eamers for the Crazy dragon heatblock, as well as @bythorsthunder for the Stealthburner Rapido UHF body design the awesome base design from the VoronDesign team!

For the regular Dragon UHF hotend with the extended melt zone, use the SB_Dragon_UHF_TH_*.stl and the enlarged main body Stealthburner_Body_Dragon_UHF.stl. Parts were extended by 8.3mm to fit the Stealthburner Rapido UHF main body by @bythorsthunder.

If you use the Dragon UHF mini hotend (standard UHF version without the melt zone extender), use SB_Dragon_UHF_TH_mini_*.stl and the regular Stealthburner body.

The fan duct is designed based on the Crazy Dragon Fan Duct, allowing air to only blow towards the heatbreak. More clearance for the heater cable was added to allow mounting the hotend in the proper direction (heater facing forward, thermistor facing backward). Additionally, clearance for the Voron Tap (R8) screws were added.

Print Parameters

Print in standard Voron settings.

Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini

EmJay276

License:

Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini tool cartridge

Print Parameters

Previews