LRS Offset Mount and Stabilizer

This allows you to offset the LRS PSU to add an additional LRS PSU to the same DIN.

Printing

• Print 1 set of offset mounts per LRS PSU
• Print 2 Voron PCB DIN Clip per PSU
• Print 1 PSU stabilizer per PSU
• Default Voron settings
• No supports needed

Note:

• VT - use any length range
• V2.4
  • 250mm - suggest use 35mm to 55mm or 35mm to 95mm
  • 300mm - suggesr use 50mm to 70mm or 35mm to 95mm
  • 350mm - suggest use 75mm to 95mm or 35mm to 95mm

BOM

per LRS Offset and Stabilizer