Screws
| Size | Qty |
|---|---|
| M3x12 | 4 |
| M3x16 or M3x20 SHCS | 16 |
| M5x20 | 4 |
| Ge5C Bearing | 4 |
| M5x1mm spacer | 4 |
| If using Halleffect 6x3 magnet | 1 |
First just insert GE5C bearing , it should just pop in
Now if you are using the "slim" version you need 4 m3x16 screws per z joint, if you are using the standard or hall effect version then you need 4 m3x20 per z joint.
Use an M5x20 BHCS and 1 m5x1mm washer and screw it into the gantry using a roll in tnut
This is how it should be assembled when all done
