Remix of the crew mods deck panel that uses brass heat inserts instead of nylon stand-offs to not have screw heads showing when looking at the printer. Allows inserts 5 mm x 6 mm (shorter 4 mm ones recommended for PSU).
Designed for spec hardware:
The "Deck_Panel_with_Logo.zip.amf" contains two STLs, one being the Voron logo 0.4 height and 60° sides (2 layers), the other being the deck panel without the Logo. You can print the logo first in your accent color, change filament and print the main color over it without touching the bed in between. Deactivate fans for overhands and put overhang flor to 100% to get a proper adhesion between the two prints. Also put z-Hop to 0.2 mm (perfect world) or 0.4 mm (safe side) for the main color print. no not crash the nozzle into the accent color.
