V2.4

SKR 1.3/1.4 DIN mount

aeresov

A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.

License:

General Public License v3.0

CAD

SKR_DIN_mount.f3d

STLs

SKR_DIN_mount.stl

images

db.png

photo_bare_1.png

photo_bare_2.png

photo_bare_3.png

photo_railed.png

.metadata.yml

Readme.md

Select a file to view it.

A Team Dropbear Production

Voron 2.4 SKR 1.3/1.4 mount for DIN rail

G'day, another nice thingy from down under. Got non-standard electronics compartment? Some blocks there that don't allow spec placements? Don't have or don't like self-tapping screws? Or are you just up to better wiring and sturdier construction? Alright, Dropbears to resque. Here comes a rigid bracket for SKR boards, that uses M3 bolts and nuts, and allows mounting along and across the rail. Each bracket needs 2 of rs25_psu_bracket_clip.stl.

Printing and plasic

Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc.
This part is not exposed to any significant heat, so you could probably use even PLA.

Assembly

BOM:

8 x M3 hex nuts
8 x M3x12 SHCS screws

Photos

bare 1 bare 2 bare 3 on rail

Credits

that russian guy (aeresov#9959)

Other mods by aeresov

Raspberry Pi DIN mount

MeanWell UHP-xxx DIN mount

cable tie DIN mount

TL filament sensor bracket