Link	Description
Readme	Mantis Description and Updates
BOM and Acknowledgements	BOM, links to other repositories, acknowledgements
Print Orientation	Printing the parts
Carriage Assembly	Building the MGN9, MGN12 Carriage, Hotend Mounts
Magprobe Assembly	Assembly of Mag Probe
Firmware and Slicer Settings	Firmware and Slicer Settings
Voron 1.8 and Trident	Notes on Voron 1.8 and Trident
Final Assembly	Notes and Pictures of final assembly
Usermods	Mods by Mantis Users (note: separate repository)
Long's Mantis Repository	Long's Repository for Mantis. Updates and newest stuff will be found here

Print Orientation ============  Slicer Tips: - Perimeters/Shells - 3-4 Perimeters and low infill is adequate. - Josh Murrah is using 3perim/40% on his toolhead used in speedruns. - I’ve been using 4 perimeters/15% - Ducts - Check that this outlet divider is sliced in a sane way. - In superslicer, I find the “keep only bridges” option under "Perimeters & Shell” works well for the ducts - - The ducts have some tough overhangs, so orient the part so the over hangs print the best for you. Prioritize good quality for the outlet. The 5015 mount surface will generally be rough, but that’s ok.