Skip to content
Voron Mods
Menu
  • V2.4

Microswitch Pod With Connector

by BladeScraper-Designs

v1 · source 8e5067f · 4 files

Microswitch pod with JST-XH 4-pin connector

Download all (.zip), 3 MBView source on GitHub
182 views18 downloadsupdated

Images

Files

STL models (1)

STL models: Show or hide 1 file
  • Microswitch_Pod_Connector.stl
    Microswitch_Pod_Connector.stlSTL390 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (1)

Images: Show or hide 1 file

Other files (1)

Other files: Show or hide 1 file
  • Microswitch_Pod_Connector.stpSTP422 kBDownload

README

This is a simple modification to the microswitch pod to allow the installation of a JST-XH 4-pin connector.

JST-XH 4-pin connector part number B4B-XH-A(LF)(SN) slides into the hole and there's a small lip to keep it sliding all the way thru.
Depending on your tolerances it may be tight enough as is, or you may have to use a bit of CA glue. You may need to clean up the inside of the slot a bit using a utility knife to get the JST in, as it does involve bridging.

I also slightly increased the size of the screw holes from 1.5mm to 1.7mm as I was having a hard time getting mine screwed down.

Microswitch_Pod_With_Connector

Related mods