Skip to content
Voron Mods
Menu
  • V0.2

Clippable Wago 221 Mounts

by BlueBear

v1 · source 8e5067f · 18 files

Mounts for Wago 221 to screw or clip-in on 1515 extrusions

Download all (.zip), 1.6 MBView source on GitHub
860 views88 downloadsupdated

Images

Files

STL models (6)

STL models: Show or hide 6 files
  • 1515_SnapIn_LDO.stl
    1515_SnapIn_LDO.stlSTL26 kBDownload
  • 1515_SnapIn_Makerbeam.stl
    1515_SnapIn_Makerbeam.stlSTL26 kBDownload
  • WAGO_221-412_3x2-mount.stl
    WAGO_221-412_3x2-mount.stlSTL53 kBDownload
  • WAGO_221-412_3x2-mount_screw.stl
    WAGO_221-412_3x2-mount_screw.stlSTL66 kBDownload
  • WAGO_221-412_5x2-mount.stl
    WAGO_221-412_5x2-mount.stlSTL160 kBDownload
  • WAGO_221-413_3x3-mount-screw.stl
    WAGO_221-413_3x3-mount-screw.stlSTL56 kBDownload

CAD files (6)

CAD files: Show or hide 6 files
  • 1515_SnapIn_LDO.stepSTEP38 kBDownload
  • 1515_SnapIn_Makerbeam.stepSTEP30 kBDownload
  • WAGO_221-412_3x2-mount.stepSTEP116 kBDownload
  • WAGO_221-412_3x2-mount_screw.stepSTEP143 kBDownload
  • WAGO_221-412_5x2-mount.stepSTEP255 kBDownload
  • WAGO_221-413_3x3-mount-screw.stepSTEP164 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (5)

Images: Show or hide 5 files
  • images/Mounting.jpgJPG75 kBDownload
  • images/PrintOrientation.jpgJPG45 kBDownload
  • images/ScrewMountUsage.jpgJPG902 kBDownload
  • images/picSnapMount3piece.jpgJPG185 kBDownload
  • images/picSnapMount5piece.jpgJPG195 kBDownload

README

Snap-In Wago Mounts for 1515 extrusions

Overview

This mod is derived from wago_221_mount and brings in some mounts for the Wago 221 terminals (2 and 3 contacts) to clip and to screw for 1515 extrusions.

Wago-Mount for screws

I use this mount WAGO_221-413_3x3-mount-screw.stl at the power inlet to distribute the power to pad/ssr and the PSU. There is also a WAGO_221-412_3x2-mount_screw.stl, if you plan using Wago 221-412 (2 contacts). Screw Mount Usage Any m3 screw - BHCS or SHCS - should fit.

Snap-In mounts

The snap-in mounts can be easily attached and removed from the extrusions. For using that mount print the desired stl (WAGO_221-412_3x2-mount.stl or WAGO_221-412_5x2-mount.stl together with at least two of the mounting clips(either LDO or MakerBeam depending on your extrusion).

Don't rotate the clips for printing. They must be printed upright, as shown in the picture. Otherwise the clips might break upon inserting into the extrusion.

Print Orientation

Use M2 self-tapping screws to attach the clips into the appropriate places of the mount. Screw heads must be flush otherwise the WAGOs won't fit.

Assembly

Both mounts fit into the Z-Extrusions of the V0:

5x Wago Mount

3x Wago Mount

Related mods