Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles
- V2
14,187 views1,218 downloads
- V0.2
- V1.8
- V2.4
- Trident
Raspberry Pi Zero Bracket
by D4rkCelerity
v1 · source 8e5067f · 3 files
Modified version of Trident RPi bracket to fit the smaller RPi Zero
353 views64 downloadsupdated
Images
Files
STL models (1)
STL models: Show or hide 1 file
- STL/raspberrypi_zero_bracket.stlSTL1.1 MBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD772 BDownload
Images (1)
Images: Show or hide 1 file
- image/Rendering.JPGJPG50 kBDownload
README
Raspberry Pi Zero Bracket
This is a modified version of the raspberrypi_bracket for the VORON Trident. Use this bracket along with a pcb_din_clip_v2 to mount a Raspberry Pi Zero to a DIN rail.
DIN Rail Install:
The STL file for the pcb_din_clip_v2 is located on GitHub at VoronDesign/Voron-Trident/STLs/ElectronicsBay/
Use six(6):M2x10 Self-Tapping Screws to mount the bracket to the din clip and then the RPi Zero to the bracket. Note that these fasteners are included in the VORON Trident BOM.
VHB Tape Install:
This bracket can also be installed on the VORON V0 with VHB tape in the same manner as the stock RPi bracket.
Related mods
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Trident Inverted Electronics
by LoganFraser
Flip the Trident electronics bay for top access.- VT
11,159 views1,388 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,919 views1,138 downloads
20x20mm Profile Covers
by chri.kai.in
Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles- V1
- V2
- VSW
- VT
5,449 views944 downloads