Dual Mobius Mount
by Danowar
Mounts two Mobius Extruders to the back of the printer
Legacy area
- V1
- V2
0 views0 downloads
Legacy area
- V2.1
- V2.2
Alternative Z Chain
by Danowar
v1 · source 8e5067f · 5 files
Alternative mounting for Z-Axis zipchain
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (2)
Documents (1)
Documents: Show or hide 1 file
- readme.mdMD460 BDownload
README
Alternative mounting for Z-Axis zipchain
Overview
Mount Z-Axis zipchain under the rear gantry crossbar, instead of in front of it. Cleaner look, and frees up some room back there. Print 2 of each STL. One anchor attaches to a standoff for the bottom. The second standoff is use as a spacer to support the chain when gantry is in lower positions. Additional zipchain links will also be needed.
Related mods
Humidity Sensor Bracket
by Danowar
Mount for Humidity/Temperature sensorLegacy area- V1
- V2
0 views0 downloads
Load Cell Spool Holder
by Danowar
Spool holder with built in weight scaleLegacy area- V2
0 views0 downloads
TL 2-to-1 Mosquito Toolhead Adapter
by Danowar
Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolheadLegacy area- V1
- V2
0 views0 downloads