Skip to content
Voron Mods
Menu
  • V2.4
  • Trident

LED Strip Holder

by DerekBackus

v1 · source 8e5067f · 7 files

Simple bracket to mount an LED strip

Download all (.zip), 1.6 MBView source on GitHub
2,536 views180 downloadsupdated

Images

Files

STL models (1)

STL models: Show or hide 1 file

Documents (1)

Documents: Show or hide 1 file

Images (4)

Images: Show or hide 4 files
  • Images/LED_Holder_ISO.pngPNG14 kBDownload
  • Images/LED_Holder_Picture.jpgJPG1.4 MBDownload
  • Images/LED_Holder_Side_View.pngPNG2.2 kBDownload
  • Images/LED_Strip_Example.jpgJPG111 kBDownload

Other files (1)

Other files: Show or hide 1 file

README

LED Strip Holder

Works on Trident & 2.4 any size.

This mod lets you mount LED strips inside your printer. I mounted three in mine and it is like daylight inside the box.

I used these 24V strips from Amazon and connected them to a fan output on my Octopus board. Works a treat.

You can mount as many "strips" in your printer as you like. I have one on the front rail and one on each side for a total of three. You can cut the strip at the solder obrounds and connect them with wire to go around the corners. I run the wire in the extrusion down to the controller and use an extrusion cover to hold the wires in.

Related mods