V2.4 Z Drive Motor Tensioner Mod
by Dr-Info
Braced motor tensioner for z drive
- V2
4,330 views315 downloads
- V2.4
- Trident
BTT 5160T Plus Mounts
by Dr-Info
v1 · source 8e5067f · 14 files
Mounts for BTT 5160T Plus to DIN, 2020 and 1515
714 views37 downloadsupdated
Images
Files
STL models (9)
STL models: Show or hide 9 files
- STL/Air_Cooled/30mm_fan_shroud_5160T_plus_x2.stlSTL739 kBDownload
- STL/Air_Cooled/40mm_fan_shroud_5160T_plus_x2.stlSTL709 kBDownload
- STL/Air_Cooled/50mm_fan_shroud_5160T_plus_x2.stlSTL693 kBDownload
- STL/Mounts_and_Brackets/1515_bracket_5160T_plus.stlSTL237 kBDownload
- STL/Mounts_and_Brackets/2020_bracket_5160T_plus.stlSTL225 kBDownload
- STL/Mounts_and_Brackets/bracket_pair_5160T_plus_x2.stlSTL623 kBDownload
- STL/Mounts_and_Brackets/din_bracket_5160T_plus.stlSTL185 kBDownload
- STL/Mounts_and_Brackets/din_bracket_5160T_plus_left.stlSTL206 kBDownload
- STL/Mounts_and_Brackets/din_bracket_5160T_plus_right.stlSTL206 kBDownload
CAD files (1)
CAD files: Show or hide 1 file
- CAD/mounts_btt_5160t_plus.stepSTEP3.5 MBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD1.5 kBDownload
README
TMC mounts for BTT 5160T Plus
A single mount will hold a pair of 5160T Plus. Each mount is designed for direct mount to a DIN rail or use a combination of the brackets to mount to 2020 extrusion, 1515 extrusion or offset the mount near your MCU. The offset mounts for the MCU include a left, right and center to allow the user to get the ideal position.
Printing
- Print 1 mount per pair BTT 5160T Plus
- Print 2 Voron PCB DIN Clip (Not needed for 2020 bracket)
- Print 2 brackets per mount (optional)
- Default Voron settings
- No supports needed
BOM
per TMC Mount
| Item | Size | Qty | Comment |
|---|---|---|---|
| Self Tapping Screw | M2x10 | 4 | Direct DIN Mount |
| Self Tapping Screw | M2x10 | 8 | DIN Mount with brackets |
| SHCS/BHCS | M3x8 | 4 | 2020 bracket to 2020 |
| T-Nut | M3-2020 | 4 | 2020 bracket to 2020 |
Fan Duct Mounts for BTT 5160T Plus
Mounts for 30mm, 40mm and 50mm fans. FYI 30mm fan mount is the lowest profile.
Printing
- Print 2 fan mounts per BTT 5160T Plus Mount
- Default Voron settings
- No supports needed
BOM
per Fan Mount
| Item | Size | Qty | Comment |
|---|---|---|---|
| SHCS/BHCS | M3x12 (max 16) | 4 | Secure fan mount and TMC to TMC mount |
| SHCS/BHCS | M3x12 (max 16) | 4 | 3010, 4010 or 5010 |
Related mods
LRS DIN Mount Offset
by Dr-Info
Offset mount for LRS PSU on DIN rail with stabilizer- V2
- VT
1,419 views135 downloads
Lever Connector Mount Side Fan Support
by Dr-Info
Mount Universal Lever Connectors or WAGO 221 using the side fan support.- V2
- VT
1,231 views193 downloads
Corner Cable Cover with Drop Holes
by Dr-Info
Corner cable cover around Z-idler with drop holes near z frame and cutouts for inline wiring from 2020 extrustions- V2
- VT
1,621 views143 downloads
V2.4 Rear Skirt Mod for Z-Drive Motor Tensioner Mod
by Dr-Info
This mod enables the you to utilize the rear skirts, power and keystone, in your V2.4R2- V2
649 views75 downloads
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,185 views1,217 downloads