Skip to content
Voron Mods
Menu
  • V2.4

Bed Support Extrusions Alignment Tools

by GadgetAngel

v1 · source 8e5067f · 8 files

The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.

Download all (.zip), 15 MBView source on GitHub
2,396 views534 downloadsupdated

Images

Files

STL models (4)

STL models: Show or hide 4 files
  • Bed_Support_Alignment_Tool_250_Corners_x4.stl
    Bed_Support_Alignment_Tool_250_Corners_x4.stlSTL86 kBDownload
  • Bed_Support_Alignment_Tool_300_Corners_x4.stl
    Bed_Support_Alignment_Tool_300_Corners_x4.stlSTL104 kBDownload
  • Bed_Support_Alignment_Tool_350_Corners_x4.stl
    Bed_Support_Alignment_Tool_350_Corners_x4.stlSTL90 kBDownload
  • Bed_Support_Alignment_Tool_Center_250_300_350_x2.stl
    Bed_Support_Alignment_Tool_Center_250_300_350_x2.stlSTL56 kBDownload

CAD files (1)

CAD files: Show or hide 1 file
  • CAD/Bed_Support_Alignment_Tools_v15.f3dF3D15 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (2)

Images: Show or hide 2 files
  • images/Bed_Suport_Alignment_Tools_each_pointed_out.jpgJPG438 kBDownload
  • images/Bed_Support_Alignment_Tools.jpgJPG109 kBDownload

README

Bed Support Alignment Tools for Voron 2.4

This repository contains .stl files for the bed support alignment tools for each of the standard Voron 2.4 builds. The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. The Voron assembly manual does not state where the "bed support extrusions" should be placed, so I created this very simple tool that you can 3D print. When the alignment tools are placed in all four corners of the Voron 2.4 Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position. For completeness, I also created a piece that you can place in between the two "bed supports extrusions" as a second way to check to see if everything is correctly placed.

Edited: 4/20/2022

The recent update to this tool was done by Voron user @Samwiseg0#4034. Thank you Samwiseg0#4034 for the upgrade!

Picture of Bed Support Alignment Tool:

Bed Support Alignment Tools

This is how to use the Alignment Tools:

Bed Support Alignment Tools each pointed out

Related mods

  • Cricut Voron Logos

    by GadgetAngel

    For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!
    • V0
    • V2
    • VSW
    • VT
    3,969 views683 downloads

  • Angry CAM USB

    by chri.kai.in

    Housing for small USB camera module, allowing mounting to gantry or frame profiles
    • V2
    14,185 views1,217 downloads

  • Belt Tension Meter

    by Kruppes

    Print in place tension meter to easily tighten multiple belts to the same tension
    • V0
    • V1
    • V2
    • VSW
    9,343 views1,131 downloads

  • 20x20mm Profile Covers

    by chri.kai.in

    Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles
    • V1
    • V2
    • VSW
    • VT
    5,449 views944 downloads