Skip to content
Voron Mods
Menu
  • Switchwire

Feed slot with filament pass-through

by Jasrags

v1 · source 8e5067f · 11 files

A feed slot with a filament pass-through

Download all (.zip), 1.3 MBView source on GitHub
271 views13 downloadsupdated

Images

Files

STL models (2)

STL models: Show or hide 2 files

CAD files (2)

CAD files: Show or hide 2 files

Documents (1)

Documents: Show or hide 1 file

Images (6)

Images: Show or hide 6 files
  • images/CAD_bottom_profile.pngPNG73 kBDownload
  • images/CAD_front_profile.pngPNG31 kBDownload
  • images/CAD_offset_profile.pngPNG255 kBDownload
  • images/CAD_side_profile.pngPNG14 kBDownload
  • images/Mounted_1.pngPNG290 kBDownload
  • images/Mounted_2.pngPNG381 kBDownload

README

Voron Switchwire feed slot with filament pass-through

This mod is a replacement for the stock feed_slot.stl, it adds a OD 4mm reverse bowden passthrough hole. It also removes the need for VHB tape with two clamps that screw into heatset inserts.

Parts Required

  • 2 BOM heatset inserts
  • 2 M3x6 button or socket head

Printing

  • Standard Voron part settings were used but the infill was dropped down to 20%

Installation

  1. Install heatsets on the bottom side of the new filament slot
  2. Remove the old feed slot and VHB tape
  3. Install the new feed slot and use the two clamps and M3x6 screws to secure

Note

I designed this orignally for a bowden tube pass-through but at high Z the tube was unmanagable but would love to see if anyone comes up with a solution for this.

Related mods

  • Belt Tension Meter

    by Kruppes

    Print in place tension meter to easily tighten multiple belts to the same tension
    • V0
    • V1
    • V2
    • VSW
    9,343 views1,131 downloads

  • 20x20mm Profile Covers

    by chri.kai.in

    Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles
    • V1
    • V2
    • VSW
    • VT
    5,449 views944 downloads

  • WagoMounts

    by LoganFraser

    Wago Mounts for Din Rail or 2020 Extrusion mounting.
    • V2
    • VSW
    • VT
    4,196 views749 downloads

  • Cricut Voron Logos

    by GadgetAngel

    For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!
    • V0
    • V2
    • VSW
    • VT
    3,969 views683 downloads