Skip to content
Voron Mods
Menu
  • V0.2

Encosed Bottom

by Kruppes

v1 · source 8e5067f · 18 files

Modified printed parts and panel to fully enclose V0.

Download all (.zip), 2.9 MBView source on GitHub
548 views30 downloadsupdated

Images

Files

STL models (7)

STL models: Show or hide 7 files
  • Common_STLs/Back_Lip.stl
    Common_STLs/Back_Lip.stlSTL62 kBDownload
  • Common_STLs/Skirt.stl
    Common_STLs/Skirt.stlSTL1.2 MBDownload
  • Fancy_Panel/[a]_Foot_Back_x2.stl
    Fancy_Panel/[a]_Foot_Back_x2.stlSTL266 kBDownload
  • Fancy_Panel/[a]_Foot_Front_x2.stl
    Fancy_Panel/[a]_Foot_Front_x2.stlSTL404 kBDownload
  • Simple_Panel/[a]_Footback_L_x1.stl
    Simple_Panel/[a]_Footback_L_x1.stlSTL258 kBDownload
  • Simple_Panel/[a]_Footback_x1.stl
    Simple_Panel/[a]_Footback_x1.stlSTL255 kBDownload
  • Simple_Panel/[a]_Footfront_x2.stl
    Simple_Panel/[a]_Footfront_x2.stlSTL387 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (8)

Images: Show or hide 8 files
  • Fancy_Panel/fancy_dimensions.pngPNG126 kBDownload
  • Simple_Panel/simple_dimensions.pngPNG80 kBDownload
  • pictures/back_photo.jpgJPG70 kBDownload
  • pictures/back_view.pngPNG87 kBDownload
  • pictures/bottom_photo.jpgJPG67 kBDownload
  • pictures/fancy_bottom.pngPNG528 kBDownload
  • pictures/side_view.pngPNG217 kBDownload
  • pictures/simple_bottom.pngPNG958 kBDownload

Other files (2)

Other files: Show or hide 2 files
  • Fancy_Panel/Bottompanel_fancy.dxfDXF4.5 kBDownload
  • Simple_Panel/Bottompanel_simple.dxfDXF3 kBDownload

README

README

Overview

This is my take on fully enclosing the V0. This mod lifts the printer by 10 mm and requires new legs and skirts to be printed. Without further modification this mod can not be printed on a V0 since a bigger build volume is required.

Variants:

I designed two variants of the bottom panel:

  • Simple: This only requires a rectangular cut (223 mm x 226 mm x 3 mm) bottom panel (can also be printed). The drawback is that the feet have to be removed to access electronics and the feet can only be properly attached with the panel.

  • Fancy: Requires to cut out to leave out the legs. More loose fit. Non supported corners require stiff panel. Panel can be attached or not independant on the feet.

Requirements:
  • Single part skirts (too big to print on V0).
  • Legs matching the variant you chose.
  • 3 mm stiff panel cut to shape. I used Dibond and cut it with a jigsaw.
  • 4 x M3 x 40 mm screws for the longer legs.
  • 4 x M3 x 6 mm screws to mount panel and lip.
Lip:

The Lip to cover the portion below the spec "back panel" has to be printed and can be attacked with VHB and/or a single screw. Pictures show non uploaded variant with serial added by first layer color change (not uploaded)

Assembly:

The skirts and the lip require a 5x4 m3 brass heat insert. The lip can optionally also be attached with VHB.

Related mods

  • Belt Tension Meter

    by Kruppes

    Print in place tension meter to easily tighten multiple belts to the same tension
    • V0
    • V1
    • V2
    • VSW
    9,343 views1,131 downloads

  • Cricut Voron Logos

    by GadgetAngel

    For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!
    • V0
    • V2
    • VSW
    • VT
    3,969 views683 downloads

  • HorseshoeSpoolHolder

    by LoganFraser

    Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.
    • V0
    • V1
    • V2
    • VT
    4,171 views258 downloads