Skip to content
Voron Mods
Menu
  • V0

Matchstick Diffusers

by MapleLeafMakers

v1 · source 8e5067f · 11 files

Mounts and Diffusers for the popular "on-a-matchstick" LEDs

Download all (.zip), 941 kBView source on GitHub
1,730 views149 downloadsupdated

Images

Files

STL models (7)

STL models: Show or hide 7 files
  • STL/[c]_diffuser_x2.stl
    STL/[c]_diffuser_x2.stlSTL5.1 kBDownload
  • STL/bottom_mount_clip_x4.stl
    STL/bottom_mount_clip_x4.stlSTL58 kBDownload
  • STL/main_body_daylight_A.stl
    STL/main_body_daylight_A.stlSTL26 kBDownload
  • STL/main_body_daylight_B.stl
    STL/main_body_daylight_B.stlSTL26 kBDownload
  • STL/main_body_rainbow_A.stl
    STL/main_body_rainbow_A.stlSTL25 kBDownload
  • STL/main_body_rainbow_B.stl
    STL/main_body_rainbow_B.stlSTL25 kBDownload
  • STL/top_mount_clip_x4.stl
    STL/top_mount_clip_x4.stlSTL64 kBDownload

CAD files (1)

CAD files: Show or hide 1 file
  • CAD/matchstick_diffuser.stepSTEP1.1 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (2)

Images: Show or hide 2 files

README

Matchstick Diffuser

A diffuser for the Daylight/Rainbow on a Matchstick LEDs

Images/CAD1.png Images/photo.jpg

Compatibility

These mounts are only designed to fit the Daylight-on-a-matchstick and Rainbow-on-a-matchstick LEDs. Compatibility is not guaranteed with other designs.

These prints require slightly larger than a 120x120 bed, so they cannot be printed on a V0, though they are designed to be used on one.

BOM
ItemQty
M3 Heatset Insert4
M3x6 BHCS4
Printing
  • Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a Matchstick
  • Print one of each main_body_rainbow_A.stl and main_body_rainbow_B.stl if you have Rainbow on a matchstick
  • Print 2 [c]_diffuser_x2.stl in a clear or white filament.
  • Print 4 of either top_mount_clip_x4.stl or bottom_mount_clip_x4.stl depending on where you intend to mount the LEDs.
Assembly
  • Insert heatset inserts into the clips
  • Insert matchstick led strip into main body
  • Using M3x6 BHCS, fasten the clips to the back of the leds
  • Insert the diffuser into the main body

Related mods