Wansview 1080p Camera Mount
by Rhastlyn
A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion
- V2
998 views61 downloads
- V2.4
60mm Fan Cover
by Rhastlyn
v1 · source 8e5067f · 3 files
A easy to install cover for spec 60mm fans originally designed for a 2.4 build
397 views31 downloadsupdated
Images
Files
STL models (1)
STL models: Show or hide 1 file
- STL/60mm_fan_grill_rev1.stlSTL145 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD688 BDownload
Images (1)
Images: Show or hide 1 file
- Images/FancoverOverview.pngPNG3 MBDownload
README
60mm Fan Cover for Controller Fans
I took inspiration from StvPtrsn to create an accent cover for the 60mm fans cooling the electronics enclosure. His design is integrated with the skirts and would likely be much more structrually sound; my goal was to make a simple cover that you can insert from the outside without flipping the printer over. It is attached with a small quantity of 3M VHB tape in each of the corners.
Installation:
- Apply a small piece of VHB tape on the body of the fan in each of the four corners
- Insert the pegs of the cover into the fan holes
- Hold for 30 seconds to give the VHB tape time to bond
Related mods
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,188 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,919 views1,138 downloads
20x20mm Profile Covers
by chri.kai.in
Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles- V1
- V2
- VSW
- VT
5,449 views944 downloads