Legacy area
- V2.1
- V2.2
Z Rail Stop
by Sparreau
v1 · source 8e5067f · 4 files
Z Rail Stop
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (2)
CAD files (1)
CAD files: Show or hide 1 file
- z_rail_stop_PARAMETRIC_x4.f3dF3D117 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD232 BDownload
README
_zrail_stop(top/bottom)_x4 I made these primarily to set the 25mm spacing of the Z linear bearing rails from the bottom extrusion of the printer. While I was at it, I re-shaped it to mate up to the rail a bit better.
Related mods
Mains Plug Panel Parametric
by Sparreau
Scalable mains plug panel with small modificationsLegacy area- V1
- V2
0 views0 downloads
Z Idler Frame Extra Tab
by Sparreau
An extra tab added to the Z idler to prevent sagging / rotationLegacy area- V2
0 views0 downloads