BlTouch Mount
by Stephan
Drop in replacement of the stock probe to a BLTouch
Legacy area
- V2
0 views0 downloads
Legacy area
- V2.1
M12 Probeholder
by Stephan
v1 · source 8e5067f · 4 files
Drop in replacement of the stock probe to a M12
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (1)
STL models: Show or hide 1 file
- M12_probe_mount.stlSTL2.6 MBDownload
CAD files (1)
CAD files: Show or hide 1 file
- Probeholder_M12.stepSTEP2.5 MBDownload
Documents (1)
Documents: Show or hide 1 file
- Readme.mdMD457 BDownload
Images (1)
Images: Show or hide 1 file
- M12_probe_mount.jpgJPG2.5 MBDownload
README
Probeholder M12
I was not that happy with the stock probe. For mounting a probe with more precision i designed the mount. It is inline with the stock mount and can be set in upper and lower position for the Vulcano as you did with the origial mount. Distances are same between the threads.
You also get the benefit to mount capacitive probes, to parralelize with a BuildTak or other non metal buildsurface. All M12x1 probes fit up to a length of 60mm.
Related mods
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,189 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,922 views1,138 downloads
20x20mm Profile Covers
by chri.kai.in
Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles- V1
- V2
- VSW
- VT
5,449 views944 downloads