Legacy area
- V2.1
- V2.2
Switch Holder
v1 · source 8e5067f · 5 files
Holder for Anit-Vandal Switches mounted in skirt holes
0 views0 downloads
Images
This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.
Files
STL models (2)
Documents (1)
Documents: Show or hide 1 file
- Readme.mdMD213 BDownload
Images (1)
Images: Show or hide 1 file
- Switchpreview.jpgJPG103 kBDownload
Other files (1)
Other files: Show or hide 1 file
- Elevator_Switch_Skirt_holder_v4.f3dF3D2 MBDownload
README
This is a switch holder intended for holding 19mm anti vandal momentary/latching pushbutton switches in the open hexagons in the skirts of Voron 2.1/2.2
Related mods
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,189 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,922 views1,138 downloads
20x20mm Profile Covers
by chri.kai.in
Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles- V1
- V2
- VSW
- VT
5,449 views944 downloads