Skip to content
Voron Mods
Menu
  • Switchwire

Ender 3 Switchwire Taller Z Mod

by buzzdalf

v1 · source 8e5067f · 16 files

Taller Z Mod

Download all (.zip), 9.8 MBView source on GitHub
601 views37 downloadsupdated

Images

Files

STL models (7)

STL models: Show or hide 7 files
  • STL/Bowden_Guide_x2.stl
    STL/Bowden_Guide_x2.stlSTL200 kBDownload
  • STL/Left_Front_x1.stl
    STL/Left_Front_x1.stlSTL227 kBDownload
  • STL/Left_Rear_x1.stl
    STL/Left_Rear_x1.stlSTL106 kBDownload
  • STL/Right_Front_x1.stl
    STL/Right_Front_x1.stlSTL229 kBDownload
  • STL/Right_Rear_x1.stl
    STL/Right_Rear_x1.stlSTL106 kBDownload
  • STL/[a]_Upper-Block_Left_Top_x1.stl
    STL/[a]_Upper-Block_Left_Top_x1.stlSTL13 MBDownload
  • STL/[a]_Upper-Block_Right_Top_x1.stl
    STL/[a]_Upper-Block_Right_Top_x1.stlSTL13 MBDownload

CAD files (5)

CAD files: Show or hide 5 files

Documents (1)

Documents: Show or hide 1 file

Images (3)

Images: Show or hide 3 files

README

I loved the Ender 3 to Switchwire conversions that Gizzle and Triano did, but I didn't like the idea of losing z-height, so I created this mod. These parts are to extend the usable z-height of the printer back up around 250mm (I get 247mm with it on my own printer). I re-used the upper Z parts Gizzle designed, and am including those here as well so you have everything you need in this repository.

I also designed a bowden guide that will let you route your bowden tube between the belts and the upper cross member of the printer as seen in the picture below. This works really well with a bowden setup, like the dual M4 extruders I use.

You will need a base conversion for your Ender 3 in addition to these files. You can find Gizzle's Ender 3 conversion in the VoronUsers github page.

image1

image2

image3

Related mods