Skip to content
Voron Mods
Menu
Legacy area
  • V2.2

Triangle Lab Filament Sensor Mount

by cadriel

v1 · source 8e5067f · 7 files

Triange Lab filament sensor mounts

Download all (.zip), 763 kBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (2)

STL models: Show or hide 2 files
  • triangle_lab_filament_sensor_mount_a.stl
    triangle_lab_filament_sensor_mount_a.stlSTL229 kBDownload
  • triangle_lab_filament_sensor_mount_b.stl
    triangle_lab_filament_sensor_mount_b.stlSTL121 kBDownload

CAD files (2)

CAD files: Show or hide 2 files
  • triangle_lab_filament_sensor_mount.f3dF3D321 kBDownload
  • triangle_lab_filament_sensor_mount.stepSTEP322 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (2)

Images: Show or hide 2 files
  • triangle_lab_filament_sensor_mount.jpegJPEG142 kBDownload
  • triangle_lab_filament_sensor_mount_small.jpegJPEG142 kBDownload

README

cadriel Voron-Mods

triangle_lab_filament_sensor_mount

These are modelled off the original designs in the mobius repository. I've reduced their footprint, and added additional plastic to better support the mounts in the extrusions. Prior to this change, I found they were leaning in.

They're also modelled to support the common bowden fittings in use.

Any nut combination should work. M3x20mm.

Related mods