Voron 2.4 Extrusion Jig
by claytono
A jig help align extrusions to get a properly square frame
- V2
2,660 views512 downloads
- V1.8
- V2.4
Fysetc S6 V2 Mount
by claytono
v1 · source 8e5067f · 4 files
DIN Mount for the Fysetc S6 V2 controller
269 views25 downloadsupdated
Images
Files
STL models (1)
STL models: Show or hide 1 file
- Fysetc_S6_V2_Mount.stlSTL341 kBDownload
CAD files (1)
CAD files: Show or hide 1 file
- Fysetc_S6_V2_Mount.stepSTEP307 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD647 BDownload
Images (1)
Images: Show or hide 1 file
- render.pngPNG160 kBDownload
README
Fysetc S6 V2 Mount
This is a mount for the Fysetc S6 V2 board that is intended to be used with the V2 PCB DIN mount brackets and should work with any machine with DIN rails. To use this, print the mount and two of the V2 PCB DIN mounts. Attach the PCB DIN mounts using M2 self tapping screws. Attach the Fysetc S6 to the mount using M3 hardware of your choice. I used 6mm M3 hardware, but 8mm should work fine.
This mount was designed and tested with the Fysetc S6 V2.0 board, but likely works with the S6 1.2 and F6 boards, since they're documented to have the same footprint.
Related mods
V0 Zip Tie Skirts
by claytono
V0 skirts with small loops added along the top to allow zip tyiing cables to them- V0
220 views17 downloads
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,187 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,919 views1,138 downloads