Skip to content
Voron Mods
Menu
  • V1.8
  • V2.4
  • Trident

Euclid Probe Carriage

by frankaf

v1 · source 8e5067f · 8 files

A MGN-12 carriage with an inset mount for a Euclid Probe

Download all (.zip), 3.4 MBView source on GitHub
349 views13 downloadsupdated

Images

Files

STL models (2)

STL models: Show or hide 2 files
  • STLs/x_carriage_frame_left_euclid.stl
    STLs/x_carriage_frame_left_euclid.stlSTL814 kBDownload
  • STLs/x_carriage_frame_right_euclid.stl
    STLs/x_carriage_frame_right_euclid.stlSTL1.1 MBDownload

CAD files (1)

CAD files: Show or hide 1 file
  • CAD/trident-euclid-carriage.stepSTEP10 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (4)

Images: Show or hide 4 files
  • Images/CAD-bottomview.pngPNG283 kBDownload
  • Images/CAD-frontview.pngPNG86 kBDownload
  • Images/real-bottomview.jpgJPG177 kBDownload
  • Images/real-frontview.jpgJPG201 kBDownload

README

Afterburner MGN12 Carriage with Integrated Euclid Probe

Euclid Probe by nionio6915 (Github), https://www.euclidprobe.com/

Printed mount

This is a modified version of the MGN12 carriage for a Voron Trident or modded Voron 2.4 with a cutout for mounting the upper Euclid PCB.

CAD view of the Euclid Probe embedded in the carriage

Other than requiring a Euclid Probe, the only additional parts needed for the MGN12 carriage are two M3 heatset inserts for mounting the upper PCB.

When installed, the Euclid's magnets should barely protrude from the bottom of the carriage.

Front view, showing magnets

The JST connector should be easily accessible from above

Front view, printed

Probe Dock

The Euclid Probe project has Voron docks available on euclidprobe.com, under "Mounts & Docks by Printers" > "Voron 2.4 / Voron Trident"

The available docks mount to the bed rails, removing the probe from the motion plane after moving up in the Z axis. Adjustment should be performed to move the dock along your maximum Y position to avoid errant pickups as much as possible.

Related mods