Skip to content
Voron Mods
Menu
  • V2.4

Voron2.4 Y Endstop Relocation

by hartk1213

v1 · source 8e5067f · 10 files

This mod relocates the Y endstop to the top A drive piece

Download all (.zip), 8.7 MBView source on GitHub
4,346 views295 downloadsupdated

Images

Files

STL models (2)

STL models: Show or hide 2 files
  • STLs/Gantry/AB_Drive_Units/OLD(24r1)/a_drive_frame_upper_with_jst_y_endstop.stl
    STLs/Gantry/AB_Drive_Units/OLD(24r1)/a_drive_frame_upper_with_jst_y_endstop.stlSTL1.1 MBDownload
  • STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_with_jst_y_endstop.stl
    STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_with_jst_y_endstop.stlSTL1.1 MBDownload

CAD files (3)

CAD files: Show or hide 3 files
  • CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_with_endstop.stepSTEP889 kBDownload
  • CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_with_endstop_pinned.stepSTEP889 kBDownload
  • CAD/Gantry/X_Axis/X_Carriage/MGN12Umblilcal.stepSTEP1.4 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (4)

Images: Show or hide 4 files

README

This mod moves the Y endstop to the A drive, to go along with Arkeet's MGN12 mod that has the X endstop on the toolhead. This mod requires a 2 pin JST-XH to be soldered to the switch. The best way I have done it is to solder the wires to the JST-XH first, install it with a dab of super glue, then solder the wires to the Omron switch.

There are 2 different files

non pinned version

  • a_drive_frame_upper_with_jst_y_endstop.stl

pinned version (since this mod also works with the Voron2.4_Trident_Pins_Mod)

  • a_drive_frame_upper_with_jst_y_endstop_pinned.stl

here are a few pics for reference

A Drive

A Drive With JST

Jst with Wires

you might need to bend the pins a little bit to get them to fit around the curve

JST with bent pins

Related mods