Skip to content
Voron Mods
Menu
  • V2.4

Sturdy Handles

by jeoje

v1 · source 8e5067f · 7 files

Modified v2.2 handles with no panel rest and with 4 anchor points

Download all (.zip), 2.4 MBView source on GitHub
3,551 views718 downloadsupdated

Images

Files

STL models (1)

STL models: Show or hide 1 file

CAD files (2)

CAD files: Show or hide 2 files
  • CAD/sturdy_handles.f3dF3D1.1 MBDownload
  • CAD/sturdy_handles.stepSTEP690 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (3)

Images: Show or hide 3 files

README

Voron v2.4 Sturdy Handles

I wanted handles for the v2.4 that were a bit more sturdy than I've been able to find and that didn't act as a clip for the panels. That's what I have the clips for :). This is a modified v2.2 handle that has 4 anchor points. It will not work on the bottom extrusions if you're using skirts, but should anywhere that has access to 2 adjacent sides of an extrusion. It has 6mm of clearance on the side that will go over the panel slightly.

Parts Required

PartQuantityComment
M5 X 12 SHCS2
M5 T-Nut2

Printing

  • Print using standard Voron part settings and in the orientation used in the STL
  • Supports should not be needed, but the overhang is < 45 degrees. That area is hidden from view and tolerances don't really matter there. Regardless, it prints clean for me.

Installation

  • You will likely need to move the top panel out of the way for installation. I just removed clips from one side and the middle to lift it up a bit.

Related mods