Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension
- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
- V0.2
V0 LCD Touchscreen Skirt
by jgehrig
v1 · source 8e5067f · 25 files
3.2" LCD Touch Screen Skirt
421 views16 downloadsupdated
Images
Files
STL models (8)
STL models: Show or hide 8 files
- STL/Foot_Front.stlSTL526 kBDownload
- STL/Foot_Rear.stlSTL158 kBDownload
- STL/LCD_Face_Plate.stlSTL88 kBDownload
- STL/LCD_Mounting_Bracket.stlSTL684 kBDownload
- STL/Skirt_Front_Left.stlSTL1.4 MBDownload
- STL/Skirt_Front_Right.stlSTL1.4 MBDownload
- STL/Skirt_Side_A.stlSTL3.1 MBDownload
- STL/Skirt_Side_B.stlSTL3.1 MBDownload
CAD files (1)
CAD files: Show or hide 1 file
- CAD/LCD_Skirt_Assembly.stepSTEP10 MBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD5.6 kBDownload
Images (14)
Images: Show or hide 14 files
- images/Fusion_360.pngPNG397 kBDownload
- images/Gallery_1.jpgJPG152 kBDownload
- images/Gallery_2.jpgJPG168 kBDownload
- images/Main_Image.jpgJPG1 MBDownload
- images/Side_Skirt_A.pngPNG183 kBDownload
- images/Side_Skirt_B.pngPNG183 kBDownload
- images/Thumbnail_Foot_Front.pngPNG22 kBDownload
- images/Thumbnail_Foot_Rear.pngPNG22 kBDownload
- images/Thumbnail_LCD_Face_Plate.pngPNG23 kBDownload
- images/Thumbnail_LCD_Mounting_Bracket.pngPNG25 kBDownload
- images/Thumbnail_Skirt_Front_Left.pngPNG23 kBDownload
- images/Thumbnail_Skirt_Front_Right.pngPNG23 kBDownload
- images/Thumbnail_Skirt_Side_A.pngPNG24 kBDownload
- images/Thumbnail_Skirt_Side_B.pngPNG24 kBDownload
Other files (1)
Other files: Show or hide 1 file
- CAD/LCD_Skirt_Assembly.f3zF3Z7.5 MBDownload
README
Voron 0 LCD Touchscreen Skirt
A large LCD touchscreen for OctoScreen or OctoDash.
Bill of Materials
All required parts are listed below. Supplier examples are provided for convenience.
Non-Printed Parts
Additional Non-Stock Parts:
| Qty | Description | Supplier Links |
|---|---|---|
| 1 | Adafruit PiTFT Plus 3.2 Touchscreen | Adafruit |
| 1 | M2.5 x 3.0 mm Heat Set Inserts | Alliexpress, McMaster Carr |
| 1 | M3 x 50 mm SHCS | Alliexpress, Bolt Depot |
| 4 | M2.5 x 10 mm BHCS | Alliexpress |
| 1 | 40-pin IDE Extension Cable | Amazon |
Repurposed Stock Parts:
| Qty | Description | Supplier Links |
|---|---|---|
| 12 | M3 x 8 mm BHCS | Alliexpress, Bolt Depot |
| 12 | M3 Makerbeam 1515 T Slot Nuts | Alliexpress, Amazon |
| 4 | Rubber Feet (14 x 11 x 9) | Alliexpress |
3D Printed Parts
| Qty | Description | STL Slicer Image |
|---|---|---|
| 2 | Skirt Side A |  |
| 2 | Skirt Side B |  |
| 1 | Skirt Front Left |  |
| 1 | Skirt Front Right |  |
| 1 | LCD Mounting Bracket |  |
| 1 | LCD Face Plate |  |
| 2 | Foot Front |  |
| 2 | Foot Rear |  |
All 3D Parts can be printed without support material: ABS, 0.4 mm nozzle, and 0.2mm layers.
Assembly Instructions
- Install 4 M2.5 heat set inserts into
LCD Mounting Bracket - Remove the stock V0 skirt and feet.
- Install extended feet with 50mm M3 SHCS.
- Install all
Side Skirt A/Bparts using the stock mounting T-nuts and M3 x 8 screws. - Install the
LCD Mounting Bracketusing the middle two T-nuts on the front extrusion. - Install
Front Skirt Left/Rightusing the remaining two T-nuts on each side of the LCD. - Connect the 40-pin ribbon cable to the
Adafruit PiTFT Plus. - Place the
Adafruit PiTFT Plusinto theLCD Face Plate. - Route the ribbon cable through
LCD Mounting Bracketto Raspberry Pi. - Secure
LCD Face Platewith four M2.5 x 10 screws.
Software Configuration
Follow the Adafruit LCD Installation Instructions.
The 3.2" LCD is pin-equivalent to the 2.8" LCD. You can safely follow the same instructions.
The recommended installation type is fbcp, framebuffer copy:
sudo python3 adafruit-pitft.py --display=28r --rotation=90 --install-type=fbcp
The fbcp option causes the X11 output to be mirrored on the PiTFT display.
CAD Design Files
Gallery
Related mods
Extrusion/Chamber Thermistor Mount
by samwiseg0
Extrusion mount for a NTC100K Thermistor extrusion- V0
- V1
- V2
- VSW
- VT
4,605 views819 downloads
Cable Management Duct
by ryandam
Zip tie mount intergrated cable duct to hide your cable- V0
4,320 views804 downloads
Cricut Voron Logos
by GadgetAngel
For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!- V0
- V2
- VSW
- VT
3,969 views683 downloads
HorseshoeSpoolHolder
by LoganFraser
Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.- V0
- V1
- V2
- VT
4,171 views258 downloads