Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension
- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
- V0.2
V0 Clippable LED Caselight
by joposter
v1 · source 8e5067f · 7 files
LED Case light for the V0 that clips into the extrusions
1,140 views96 downloadsupdated
Images
Files
STL models (2)
CAD files (1)
CAD files: Show or hide 1 file
- CAD/led_mount_clippable.stepSTEP77 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD875 BDownload
README
V0 clippable Caselight LED Mounts
This LED strip mount is sutable for led strips with a width of 8 - 12 mm, but was made
for these 24V COB Led strips.
Since they come in segments of 62.5 mm, the strip mounts are 125mm long to fit two of those segments. When using different leds, the slicer scaling function can be used to shorten them. The clips should still work.
Attach the LEDs
The mentioned led strips come with an M3 adhesive pre-applied, which should be the case for most LED strips commonly found online. This adhesive should be sufficient for attaching LEDs to this mount.
How to print them
The clips were made to print upright, but will probably require a brim for bed adhesion.
Related mods
Extrusion/Chamber Thermistor Mount
by samwiseg0
Extrusion mount for a NTC100K Thermistor extrusion- V0
- V1
- V2
- VSW
- VT
4,605 views819 downloads
Cable Management Duct
by ryandam
Zip tie mount intergrated cable duct to hide your cable- V0
4,320 views804 downloads
Cricut Voron Logos
by GadgetAngel
For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes!- V0
- V2
- VSW
- VT
3,969 views683 downloads
HorseshoeSpoolHolder
by LoganFraser
Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.- V0
- V1
- V2
- VT
4,171 views258 downloads