Skip to content
Voron Mods
Menu
Legacy area
  • V2.2

Beltchain Remake

by mildw4ve

v1 · source 8e5067f · 11 files

Beltchain Remake for Voron 2.2

Download all (.zip), 1.2 MBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (9)

STL models: Show or hide 9 files
  • Beltchain_Remake_XY/Beltchain_Remake_XY_Cover.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_Cover.stlSTL173 kBDownload
  • Beltchain_Remake_XY/Beltchain_Remake_XY_End_A.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_End_A.stlSTL88 kBDownload
  • Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_XY_Bridge.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_XY_Bridge.stlSTL847 kBDownload
  • Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage.stlSTL161 kBDownload
  • Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage_Anchor.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_End_B_X_Carriage_Anchor.stlSTL156 kBDownload
  • Beltchain_Remake_XY/Beltchain_Remake_XY_Link.stl
    Beltchain_Remake_XY/Beltchain_Remake_XY_Link.stlSTL21 kBDownload
  • Beltchain_Remake_Z/Beltchain_Remake_Z_End_A.stl
    Beltchain_Remake_Z/Beltchain_Remake_Z_End_A.stlSTL140 kBDownload
  • Beltchain_Remake_Z/Beltchain_Remake_Z_End_B.stl
    Beltchain_Remake_Z/Beltchain_Remake_Z_End_B.stlSTL226 kBDownload
  • Beltchain_Remake_Z/Beltchain_Remake_Z_Link.stl
    Beltchain_Remake_Z/Beltchain_Remake_Z_Link.stlSTL14 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (1)

Images: Show or hide 1 file

README

Notes
  • This is a complete remake of the original V2.0 beltchain, the dimensions are completely different and there are a few new features.
  • Tested on a 350mm V2.2 #137
  • 350mm version used at least 21 links on X and Y
  • XY covers can be rescaled in the slicer to desired length
  • Z Beltchain End A might not work with stock V2.2, mine wasn't exactly stock
  • As an upgrade to the original design, these have a cut at the side of each link. Seger pliers can be used to create a gap to insert wires without needing to take the whole thing apart.
Requirements
  • 6mm GT2 belt, steel core might be ideal
  • some M3 screws, washers, nuts and tnuts

photo1

Related mods