Skip to content
Voron Mods
Menu
  • V1.8
  • V2.4
  • Switchwire
  • Trident

Zodiac BMO Stealthburner Toolhead

by muradir

v1 · source 8e5067f · 6 files

A Stealthburner toolhead for the Zodiac BMO Hotend, based on the Phaetus BMO toolhead.

Download all (.zip), 4 MBView source on GitHub
459 views26 downloadsupdated

Images

Files

STL models (3)

STL models: Show or hide 3 files
  • STLs/stealthburner_printhead_zodiac_bmo_front.stl
    STLs/stealthburner_printhead_zodiac_bmo_front.stlSTL4.4 MBDownload
  • STLs/stealthburner_printhead_zodiac_bmo_rear_cw1.stl
    STLs/stealthburner_printhead_zodiac_bmo_rear_cw1.stlSTL388 kBDownload
  • STLs/stealthburner_printhead_zodiac_bmo_rear_cw2.stl
    STLs/stealthburner_printhead_zodiac_bmo_rear_cw2.stlSTL388 kBDownload

CAD files (1)

CAD files: Show or hide 1 file
  • CAD/Zodiac_BMO_Toolhead_Stealthburner.stepSTEP6.6 MBDownload

Documents (1)

Documents: Show or hide 1 file

Images (1)

Images: Show or hide 1 file

README

Zodiac BMO Stealthburner Toolhead

A modified toolhead for use with the Zodiac BMO Hotend and compatible with RC1 of Stealthburner. It was created from the original RC1 Stealthburner Phaetus BMO Toolhead files. If changes after RC1 of Stealthburner make this mod incompatible, I will provide updated files based on the official Stealthburner CAD files. The official Zodiac3D CAD Model of their BMO Hotend was used for reference.

Images

Notes

For optimal fit it is very important that your printer's dimensional accuracy is nearly perfect. Especially Pressure Advance has to be tuned right. Even then it is still a very tight fit, when putting in the hotend. That ensures that it cannot twist or wiggle. One handed nozzle changes should be possible, but are generally not recommended.

The bowden tube length from top of the toolhead to the heatbreak of the hotend is around 31.2mm. Take that into account when calculating the total bowden length. (E.g. Clockwork2 needs 11mm above the toolhead, so that accumulates to a total bowden length of 42.2mm, when using Clockwork2.)

Test prints were made with standard ABS, ABS+ and ASA Carbon.

Related mods