Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension
- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
- V1.8
V1.8 Jigs
by natewalck
v1 · source 8e5067f · 3 files
Jigs for assembling V1.8
169 views11 downloadsupdated
Images
Files
STL models (1)
STL models: Show or hide 1 file
- lower_extrusion_alignment.stlSTL260 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD566 BDownload
Images (1)
Images: Show or hide 1 file
- images/lower_extrusion_jig.jpegJPEG1.6 MBDownload
README
Jigs for assembling V1.8
Overview
These jigs are for aligning extrusions when building V1.8. This allows you to precisely align the extrusions with a minimal amount of work.
Printing instructions
Pretty much anything works. A good starting point is 2 perimeters and 10-15% infill.
Usage
Loosely assemble the extrustion blind joint and then place the entire blind joint onto the jig. While on an extremely flat surface, press down firmly on both horizontal extrusions and tighten the blind screws.
Related mods
20x20mm Profile Covers
by chri.kai.in
Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles- V1
- V2
- VSW
- VT
5,449 views944 downloads
Extrusion/Chamber Thermistor Mount
by samwiseg0
Extrusion mount for a NTC100K Thermistor extrusion- V0
- V1
- V2
- VSW
- VT
4,605 views819 downloads
Deck Panel Support Clips
by wile-e1
Clips to help support lower deck panels to prevent (or fix) warping:- V1
- V2
3,170 views703 downloads
HorseshoeSpoolHolder
by LoganFraser
Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers.- V0
- V1
- V2
- VT
4,171 views258 downloads