Skip to content
Voron Mods
Menu
  • V2.4

Raspberry Pi 7inch Display Mount

by revnull

v1 · source 8e5067f · 15 files

An articulating mount for the offical Raspberry Pi 7inch touch screen

Download all (.zip), 3.4 MBView source on GitHub
2,136 views216 downloadsupdated

Images

Files

STL models (6)

STL models: Show or hide 6 files
  • STL/swing_arm_lg_a.stl
    STL/swing_arm_lg_a.stlSTL89 kBDownload
  • STL/swing_arm_lg_b.stl
    STL/swing_arm_lg_b.stlSTL89 kBDownload
  • STL/swing_arm_sm_x2.stl
    STL/swing_arm_sm_x2.stlSTL99 kBDownload
  • STL/voron_2.4_7in_pi_base.stl
    STL/voron_2.4_7in_pi_base.stlSTL1.5 MBDownload
  • STL/voron_2.4_lcd_mount_foot_a.stl
    STL/voron_2.4_lcd_mount_foot_a.stlSTL583 kBDownload
  • STL/voron_2.4_lcd_mount_foot_b.stl
    STL/voron_2.4_lcd_mount_foot_b.stlSTL583 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (8)

Images: Show or hide 8 files
  • Images/cable_flat.jpgJPG300 kBDownload
  • Images/cable_vertical.jpgJPG94 kBDownload
  • Images/display_flat.jpgJPG434 kBDownload
  • Images/display_front.jpgJPG445 kBDownload
  • Images/display_tilted.jpgJPG371 kBDownload
  • Images/display_vertical.jpgJPG304 kBDownload
  • Images/mount_flat.jpgJPG257 kBDownload
  • Images/mount_vertical.jpgJPG112 kBDownload

README

Articulating Raspberry Pi 7" Display Mount

Image

This is a combo remix of driftology's awesome articulating mount for the Paneldue 7i V3 and th3fallen's PITFT50 mounting plate. It enables the official Raspberry Pi 7" touchscreen display to be mounted in place of spec LCD to run KlipperScreen while allowing the screen to tile out of the way to open and close the doors when needed.

Image Image Image

Installation:

Parts:

  • Raspberry Pi Touch Display
  • Flex Ribbon Extension Cable (length depending on distance from Pi)
  • 8 x M3x8 (SHCS)
  • 2 x M4x8 (SHCS)
  • 2 x M4 T/Hammer Nuts
  • Zip ties

Optional Display Case Back:

Assemble the parts in the following orientation making sure not to overtighten or strip the screw holes. The movement should be smooth, but tight enough to hold position. Image Image

Route the ribbon cable through cutout in the center of the mounting plate and up and over the pivot points. Use zip ties to secure the cables in place ensuring there is no binding in either position. Image Image

Related mods