- V2.4
- Trident
ssd_bracket
by slitte
v1 · source 8e5067f · 7 files
bracket for mounting a 2.5" ssd to a din rail
447 views39 downloadsupdated
Images
Files
STL models (1)
STL models: Show or hide 1 file
- stl/ssd_bracket.stlSTL387 kBDownload
CAD files (1)
CAD files: Show or hide 1 file
- STEP/ssd_bracket.stepSTEP813 kBDownload
Documents (1)
Documents: Show or hide 1 file
- readme.mdMD753 BDownload
Images (4)
README
ssd_bracket
bracket to mount a ssd-drive to the din rail under a voron printer
This bracket is designed to mount a ssd drive in the electronic bay of a voron 2.4 or Trident.
The following part has to be printed x1: pcb_din_clip_x3
Bom:
- 1x ssd_bracket
- 1x pcb_din_clip
- 2x M2x10 self tapping screw
- 4x M3x12 SHCS
Instructions:
Use the M2x10 self tapping screws to mount the ssd_bracket to the pcb_din_clip. Then mount your ssd drive with the M3x12 SHCS to the ssd_bracket. Then snap the assembly in place on the din rail. It mounts similar to the Raspberry Pi on page 178 to 179 on the Voron 2.4r2 manual.
Related mods
Angry CAM USB
by chri.kai.in
Housing for small USB camera module, allowing mounting to gantry or frame profiles- V2
14,187 views1,218 downloads
Belt Tension Meter
by Kruppes
Print in place tension meter to easily tighten multiple belts to the same tension- V0
- V1
- V2
- VSW
9,343 views1,131 downloads
Trident Inverted Electronics
by LoganFraser
Flip the Trident electronics bay for top access.- VT
11,159 views1,388 downloads
Printable snap latches for 2020 extrusion
by richardjm
Quick release panel latch inspired by the work of others.- V2
12,147 views1,681 downloads
Voron2.4 and Trident Pins Mod
by hartk1213
This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins- V2
- VT
12,919 views1,138 downloads