Skip to content
Voron Mods
Menu
  • Switchwire

Switchwire Wall Plate

by sloscotty

v1 · source 8e5067f · 18 files

SW plate for enclosure

Download all (.zip), 3.1 MBView source on GitHub
214 views12 downloadsupdated

Images

Files

STL models (5)

STL models: Show or hide 5 files
  • STL/Optional/[a]_nolcd_grill_mount.stl
    STL/Optional/[a]_nolcd_grill_mount.stlSTL83 kBDownload
  • STL/WITCHWIRE_base.stl
    STL/WITCHWIRE_base.stlSTL342 kBDownload
  • STL/[a]_SW_badge.stl
    STL/[a]_SW_badge.stlSTL4.1 kBDownload
  • STL/[a]_Voron_badge.stl
    STL/[a]_Voron_badge.stlSTL4.1 kBDownload
  • STL/[a]_backplate_and_drillguide.stl
    STL/[a]_backplate_and_drillguide.stlSTL89 kBDownload

Documents (1)

Documents: Show or hide 1 file

Images (5)

Images: Show or hide 5 files
  • Images/SW_backwall_plate.jpgJPG718 kBDownload
  • Images/SW_plate_rendered.jpgJPG94 kBDownload
  • Images/assembled1.jpgJPG678 kBDownload
  • Images/base_inserts.jpgJPG793 kBDownload
  • Images/printed_pieces.jpgJPG690 kBDownload

Other files (7)

Other files: Show or hide 7 files
  • CAD/SW_backwall_plate.scadSCAD975 BDownload
  • CAD/SW_badge.scadSCAD304 BDownload
  • CAD/Voron_badge.scadSCAD276 BDownload
  • CAD/WITCHWIRE_base.scadSCAD1.5 kBDownload
  • CAD/backplate_and_drillguide.scadSCAD849 BDownload
  • CAD/voron_letters.scadSCAD123 BDownload
  • CAD/voronlogofromscratch.dxfDXF30 kBDownload

README

Switchwire Wall Plate

This mod is for pure aesthetics. A Voron Switchwire logo plate to install on the back wall of your printer's enclosure.

(Or optionally on the front grill if no enclosure - but only if you're not already using the LCD mount...)

Note: Overall size is about 225x50 (about 10mm thick)

BOM

  • (4) M3x8mm BHCS
  • (4) M3xD5.0xH4.0 heat-set inserts
  • VHB tape

Directions

  1. Install inserts in the WITCHWIRE_base

  1. Use backplate_and_drillguide to drill holes in your back panel

  2. Use thin strips of vhb tape to affix the badges into respective recesses on the base (no need to affix base to backplate)

    Note: badge tolerances are tight - you might need to sand a bit off the edges of the badges.

4. Attach to back panel with (4) M3x8 screws

(Optional: To use on front grill, affix all parts together using vhb tape, and similarly affix the optional nolcd_grill_mount to the center top of the backplate.)

CAD

OpenSCAD sources are included (it's all I know). They are sparsely commented - make modifications as you wish.

Tip: If you resize the badges, use hundredths of a mm to adjust.

Related mods