Skip to content
Voron Mods
Menu
Legacy area
  • V2.1

Corner Brackets

by steve450

v1 · source 8e5067f · 5 files

Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics

Download all (.zip), 201 kBView source on GitHub
0 views0 downloads

Images

This mod is in the legacy area of Voron Users (for older printer designs) and may not be maintained.

Files

STL models (4)

STL models: Show or hide 4 files
  • corner_bracket_left_logo.stl
    corner_bracket_left_logo.stlSTL215 kBDownload
  • corner_bracket_left_nologo.stl
    corner_bracket_left_nologo.stlSTL211 kBDownload
  • corner_bracket_right_logo.stl
    corner_bracket_right_logo.stlSTL215 kBDownload
  • corner_bracket_right_nologo.stl
    corner_bracket_right_nologo.stlSTL211 kBDownload

Documents (1)

Documents: Show or hide 1 file

README

README.md

Bottom Stiffener Corner Brackets

These brackets replace the lower Z-axis endstops and also include two additional M3 mounting holes with gusseting to affix to the rails by way of two additional T-nuts. This should serve to stiffen these joints and help prevent rail rotation.

The brackets also incorporate a plate to cover the Z-belt hole in the corplast for an improved aesthetic. There is a narrow slot in the cover portion to allow the Z-belts to slide in for post belt installation. The Z-belt hole cover should be in the proper location if everything is aligned well.

You can use the logo or nologo variety depending on your tastes. You will need two left and two right brackets to do all 4 corners.

Related mods