Car Hood Style Bed Hinge
by xbst_
A way of reaching electronics from the top by having a "car hood" style hinge for the heatbed, and rotated electronics mounts.
- V2
2,650 views68 downloads
- V0.2
Screwed Front Door Hinge
by xbst_
v1 · source 8e5067f · 9 files
Mod to screw the front door panel (instead of VHB)
1,033 views80 downloadsupdated
Images
Files
STL models (7)
CAD files (1)
CAD files: Show or hide 1 file
- CAD/V0_Screw_Front_Hinge_Mod.stepSTEP232 kBDownload
Documents (1)
Documents: Show or hide 1 file
- README.mdMD556 BDownload
README
This mod is to allow you to screw the front door panel (instead of VHB).
You need 6x 6mm M3 screws and 6x M3 inserts.
Designed for 3mm panels but should work with thinner panels as well, just use foam tape if the gap is too big.
Insert the M3 inserts to the handle and corner pieces.
Included drilling guides will let you drill the holes accurately. I recommend using 4mm (or whatever "freedom unit" equivalent) drill bits to allow for drilling errors.
Corner guides work for all 4 corners, handel guide should be used on the correct side.
Related mods
Flat V2.4 Skirts
by xbst_
Flat V2.4 Skirts so a panel without cutouts can be used- V2
542 views15 downloads
